Size: 150mm x 158mm x 34.5mm
Material Construction:
Aluminum- (RL96A-DDR) $799.00
Steel- (RL96S-DDR) $999.00
Spacing: Specific to DDR

Repeatability +/- 0.0003″


The RL96-DDR was built for the Fanuc DDR rotary table.


Standardize Your Workholding


The RockLock system creates a standard mounting pattern for your machine.  Easily move vises, fixtures, and tooling in and out with high accuracy.  Relocate fixturing from machine to machine with little to no setup time.


Reduction in Setup Time

High Accuracy


Accuracy and repeatability are critical in a quick change system.  Patented free float design ensures equal force on all 4 pull studs guaranteeing repeatability of less than .0003″ (8 microns).


Built To Last

All RockLock baseplates feature hardened steel rings and locking mechanisms.  This ensures repeatability and wear resistance for the life of the product.

Simple Integration

The pull studs are easily integrated into existing fixtures and subplates.  Pull studs can also be threaded directly into raw material for roughing operations.   Please click the link below for the PS20F pull stud print.

Easy Operation

All units are operated via a simple allen wrench.  The leadscrew only needs to be operated from one side, but has access from both sides.

Rock Lock & Go

Are you tired of building custom adapters and subplates for each new job that comes into the shop?  Stop building fixtures and start machining with the RockLock quick change system.  Job changeover becomes simple and repeatability with the RockLock system.

Pull Stud Compatibility

Pull studs & Base Must Match Manufacturer

-If you are using a 5th axis RockLock base plate you will need 5th Axis pull studs.

-If you are using a *competitor’s base plate you will need that company’s pull studs.

( *Lang, Jergens, Gressel, Gerardi, etc.)


The spacing and thread allows for the top tooling to be interchangeable between *competitive systems.

Our Low Profile RockLock Adapters


 Size: 150mm x 158mm x 34.5mm

 Mounting: Fanuc DDR

 Materials: Aluminum or Steel

 Subcategory: Low Profile Adapter


RL96A-MAM72 / RL96S-MAM72

 Size: 158mm x 126mm x 30mm

 Mounting: 96.08mm Bolt Spacing

 Materials: Aluminum or Steel

 Subcategory: Low Profile Adapter

RL96A-67 / RL96S-67

 Size: 158mm x 176mm x 30mm

 Mounting: 6.0″ x 4.0″ Bolt Pattern

 Materials: Aluminum or Steel

 Subcategory: Low Profile Adapter


 Size: 158mm x 176mm x 30mm

 Mounting: 4x M12 @ 150.0mm x 100.0mm. Through hole Ø12.02mm

 Materials: Aluminum or Steel

 Subcategory: Low Profile Adapter

5th Axis

5th Axis’s product line includes: vises, fixtures, dovetail cutters and the Rock Lock quick-change system.
© 2018 5th Axis Inc.
+1 (858) 505-0432