Size: 75mm x 100mm x 56mm
Jaw Width: 75mm
Clamping Force: 13.5 kN @ 60 Nm
Max Torque: 60 Nm
Forward Clamping Range:
0 – 40.3mm
Reverse Clamping Range:
38.5mm – 76.3mm
The V75100X is the most recent revision of our V75100 vise. Now with a new 4 bolt jaw mounting to reduce jaw lift and robust clamping and sharper teeth for a better bite.
This small compact 5 axis vise was created to be used on very small office type mills and micro pallet changers. We took the technology in the V552 and V562 and shrunk it down to create what is now the V75100X.
Serrated / Dovetail Jaws
The “Master Jaws” on the V75100X self centering vise feature are manufactured from hardened 4100 series steel. The jaws feature: 45 degree dovetail, 2.50mm step, and serrated gripper teeth for gripping of aluminum and soft steel.
Built to Last
All 5th Axis Workholding products are precision ground and hard milled to guarantee accuracy and built to withstand the harsh machining environment.
New 4 Standard M8 SHCS
2 Bolt Jaw Mounting
New 4 bolt jaw mounting
Reduced jaw lift and robust clamping
Jaws facing forward 0-40mm / Jaws Reversed 40-77mm
56.13mm (Same as V75100)
Vise Base Mounting Pattern
Direct Mount at 55mm or 4 PS16F / 52mm system
(Same as V75100)
Q. If I have programming for the original V75100, do I need to change the set-up?
A. The new V75100X jaws are wider in one direction, so the tool paths should be checked for clearance.
Q. Is there a price increase?
A. No, the NEW V75100X will be offered at same price as the original V75100. MSRP $995
Q. Will the machinable jaws for the NEW V75100X (VAJ75X/VSJ75X) work with the original V75100? Will the original machinable jaws (VAJ75/VSJ75) work on the NEW V75100X?
A. The new machinable jaws (VAJ75X/VSJ75X) are universal and compatible with both the original V75100 and the NEW V75100X and will be the only version available moving forward. The original VAJ75/VSJ75 will only work on the original V75100.