RL96A-6760 / RL96S-6760
Aluminum – (RL96A-6760) $799.00
Steel – (RL96S-6760) $999.00
Spacing: 4x M12 or 1/2” @ Ø170.0mm 60°
Repeatability +/- 0.0003″
The RL96-6760 series quick change adapter was built for the Haas TR-210 series rotaries, Hurco VMX30 series rotaries, and any other rotary with 60 degree radial T-slots.
A quick turn of the wrench actuates the cam mechanism to lock and release your fixtures and vises for fast changeover.
Standardize Your Workholding
The RockLock system creates a standard mounting pattern for your machine. Easily move vises, fixtures, and tooling in and out with high accuracy. Relocate fixturing from machine to machine with little to no setup time.
Reduction in Setup Time
Accuracy and repeatability are critical in a quick change system. Patented free float design ensures equal force on all 4 pull studs guaranteeing repeatability of less than .0003″ (8 microns).
Built To Last
All RockLock baseplates feature hardened steel rings and locking mechanisms. This ensures repeatability and wear resistance for the life of the product.
The pull studs are easily integrated into existing fixtures and subplates. Pull studs can also be threaded directly into raw material for roughing operations. Please click the link below for the PS20F pull stud print.
All units are operated via a simple allen wrench. The leadscrew only needs to be operated from one side, but has access from both sides.
Rock Lock & Go
Are you tired of building custom adapters and subplates for each new job that comes into the shop? Stop building fixtures and start machining with the RockLock quick change system. Job changeover becomes simple and repeatability with the RockLock system.
Pull Stud Compatibility
Pull studs & Base Must Match Manufacturer
-If you are using a 5th axis RockLock base plate you will need 5th Axis pull studs.
-If you are using a *competitor’s base plate you will need that company’s pull studs.
( *Lang, Jergens, Gressel, Gerardi, etc.)